GCE GROUP FÖRSTÄRKER VARUMÄRKET LÄS MER close
Hem » Sök produkt
OMT - LOW PRESSURE REGULATOR (SECOND STAGE REGULATOR)

The OMT range comprises of very accurate low pressure regulators developed for burning gas (LPG, natural gas) and commonly for non-corrosive gas as well. APPLICATION To inert network and tanks Last regulation before burners Second stage regulation for propane To compress space Low pressure and big flow PRODUCT ADVANTAGES Watertightness in case of bad weather All components comfortably accessible Easy and fast dismantling Simple a

RD 05 - RELEASE SECURITY SYSTEM

Because some fluid in a network can be dangerous, GCE has developped an efficient security device that will act on the flow when the outlet pressure will be very high or very low. The GCE security device is used only with selected regulators of the range. The security valve cut the inlet gas flow, if the outlet pressure is out of the pressure slot that has been previously adjusted. TECHNICAL DATA Spring pressure slot:   &nbs

LINE PRESSURE REGULATORS LMD 320-01/-03/-04/-05

A broad application spectrum through the 4-port configuration (type -01/-04) or 6-Port-configuration (type -03/-05), which can be delivered respectivly, with (type -04/-05) or without (type -01/-03) a relief valve. With type-03 and type-05 the use of contact gauge (accessories) in conjunction with alarm box (accessories) facilitates the monitoring of gas reserves. APPLICATION The LMD 320 reduces line pressure to give a lower supply pressure. Th

GAS SUPPLY PANELS SMD 320-16/-24/-25

These gas supply panels are mounted onto a stainless steel panel and consist of a pressure regulator, inlet and outlet pressure gauges, a relief valve and shut-off valves (type -16 at the outlet, type -24 at the inlet, type -25 at inlet and outlet) for the process gas. A choice of stainless steel coils or flexible high pressure hoses is available for the connection to the gas cylinder. The use of contact gauge (accessories) in conjunction with al

GAS MANIFOLD MC150 - STABILIZER

Whole medical range is available on gcehealthcare.com MC150 - STABILIZER is a second stage pressure reduction unit with the task to equalize the eventual pressure variation in the hospital pipeline system to ensure a correct pressure from the terminal units. MC150 - STABILIZER is a second stage reduction unit where the primary gas supply is provided by high pressure gas manifolds (such as MC80, MM90 or liquid oxygen tank (LOX)). When there

GAS MANIFOLD MC25

Whole medical range is available on gcehealthcare.com The gas cylinder manifold MC25 has a capacity of 25 m3/h and is primarily intended for small and medium-sized hospitals. The gas cylinder pressure is regulated in two steps. The change-over between operating side and reserve side is made automatically without any differences in the operating pressure. The alarm signal comes from the pressure switches to the alarm unit. The alarm signals from

GAS MANIFOLD DUPLEX (MC80)

The MC80 gas manifold is suitable for medium to large sized hospital. It has a flow capacity up to 200 m3/h and is conveniently designed in modules. The MC80 reduces the gas pressure in two steps to a constant distribution pressure. Service and tests can be carried out with no disturbance in the supply of gas to the gas distribution system. THE DUPLEX MC80 CONSIST OF THE THREE FOLLOWING UNITS: 1. MC80 - HIGH PRESSURE UNIT This module contains

CYLINDER TROLLEYS

TROLLEYS WITH 5 WHEELS Art. Nr. Description 14090630 Trolley for 10 l cylinder - static 14090636 Trolley for 10 l cylinder - antistatic TROLLEYS WITHOUT BELT Art. Nr. Description 325396136P Trolley for 10 or 20 l cylinder 325396137 Trolley for 10, 20 l cylinders, 3×10 l or 2×20 l (Dimensions H×W×D: 935×426×352 mm) 500009601P Trolley for 2,5 and 5 l cylinder

MEDIWET

The humidifier for oxygen therapy is a device allowing an increse in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically tolerated.The jar is made of polycarbonate, or polysulphone the cap with inlet adaptor of polypropylene and inlet connection of polypropylene + coated brass. TECHNICAL DATA Contents: Only sterile water Dimensions:

GAS MANIFOLD MM40 - HP UNIT

Whole medical range is available on gcehealthcare.com Manifold MM40 HP unit is an automatic manifold. It is working on the principal of different pressures between the operation and reserve regulator. By the manual lever, the operator can decide which side will be the operational side and which will be the reserve side. When the operating side is empty, the manifold will without any action start to supply gas from the reserve side with the lower