For safety and service reasons a central gas system must be equipped with shut-off valves placed so that the gas supply can easily be interrupted. The valves are mounted in a box. The emergency shut-off valve boxes shall be placed so that the gas can be shut off section wise. This means that the boxes should be placed before each ward, operating unit, part of ward for critical treatment and individual surgeries.The emergency shut-off valve box is
To meet safety requirements, the gas supply to operating rooms etc must be fitted with a device to allow instant shut off. To allow maintenance the gas supply must be controlled by section. To achieve the demands of safety and maintenance, shut-off valves should be fitted in every main line, riser and branch line in the pipework system.The valves are degreased and blown clean. They can be equipped with unions to be soldered to the copper piping.B
The pressure monitor makes sure that the lower distribution pressure for nitrous oxide compared to oxygen is kept. The lower nitrous oxide pressure will be maintained according to standards even when the emergency supply is used through quick connectors or central emergency supply. The pressure monitor is equipped with a digital pressure monitor unit monitoring the current gas pressures, and giving all the visual and acoustic alarms required by
The Pressure Watch has the same shut off function as an ordinary Emergency Shut-Off Valve Box. Behind the plexiglass you can find quick couplings and gauges. The quick couplings are used to connect spare cylinders with regulators and emergency supply hoses.To inform the hospital staff regarding gas failures the Pressure Watch is equipped with sensors for one of the following alarm systems; 1) – pressure switches that you connect to Gas alar
UNISET are new outlet points in GCE’s proposal for industrial gases service. They were created using the long term experience with production of central gas supply systems. Variants for oxygen and fuel gases are equipped with three function flashback arrestors (FBA). There are two design types for shielding gases. The first consists of flow-gauge showing flow-rate adjusted by a pressure regulator. The second one is based on a flow-meter wit
Whole medical range is available on gcehealthcare.com Medical high pressure hoses are used to connect cylinders or cylinder bundles to gas supply systems. The high pressure hose is intended to be used with a pressure up to maximum 230 bar. Pressure tested at 345 bar. The hose is equipped with a safety wire. HANDLING The high pressure hose shall be transported, stored, installed and maintained according to Instruction of Use. Maximum life time
Whole medical range is available on gcehealthcare.com Medical terminal units provide a quick and easy connection of hospital ward gas equipment to the hospital gas source. The type of medical gas outlets are decided by national standards in each country and sometimes from local requests in each hospital. GCE complies with ISO 7396 and national installation standards with secure products where every product is fully tested in production. Our Medi
Suction bottle 2 l Complete with lid Suction bag 2 l (20 pcs) Suction bottle 1 l Suction bag 1 l (20 pcs) ACCESSORIES Connection for suction bag Silicone hose; 25m; 6×12 Silicone hose; 5m; 6×12 Silicone hose; 1m; 6×12 Lid for suction bottle Catheter holder (without plate) Catheter holder (with plate)
Whole medical range is available on gcehealthcare.com COLLECTING SYSTEM GCE MediCollect and its accessories is intended for collection of liquids or/and solid particles or/and gas from body cavities or wound. It is intended to be used by healhcare professionals. GCE Medicollect range offers two main collecting systems including different sizes of jars and bags.The collecting systems are air-tight, autoclavable and fitted with overfill protecti
Art.Nr. Type Inlet pressure Outlet pressure Nominal flow rate 548900060704P RTP 21 1-8 bar 30 mbar 1,5 kg/h 548900060707P RTP 3 1-8 bar 30 mbar 3,0 kg/h 548900060708P RTP 4 1-8 bar 50 mbar 3,0 kg/h Inlet connection: W21,8x1/14"LHOutlet connection: hose nipple Ø 8 mm